Brushes for overhaul and maintenance of diesel engines
CUMMINS SERIES
![cummins series](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/cummins-series.png)
DETROIT DIESEL SERIES
![DETROIT](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/DETROIT.png)
CATERPILLAR SERIES
![CATERPILLAR SERIES](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/CATERPILLAR-SERIES.png)
INJECTOR CAVITIES
To clean the sealing area of the gasket.
Stainless steel bristles, brass ring
SB-1 ¼”-6.4mm diameter – Brush length ½”-12.7mm
SB-2 5/16”-7.9mm diameter – Brush length 5/8”-16mm
INTERNATIONAL HARVESTER
Stainless steel bristle
FB-5 Flat brush, 1/2”-12.7mm diameter, Stainless steel bristle .005”-0.13 diameter
FB-75 Flat brush, 3/4”-19mm diameter, Stainless steel bristles .005”-0.13 diameter
![INJECTOR CAVITIES](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/INJECTOR-CAVITIES.jpg)
![INTERNATIONAL HARVESTER](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/INTERNATIONAL-HARVESTER.jpg)
CRANKSHAFT LUBRICATION HOLES
CSN Set 2 Nylon brushes 6-12 5/16”-7.9mm and 7/32”-5.6mm diameter
Brush length 2”-50mm, total length 10”-254mm
CSS Set 2 Stainless steel brushes, same dimensions as CSN
![CRANKSHAFT LUBRICATION HOLES](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/CRANKSHAFT-LUBRICATION-HOLES.jpg)
VALVE GUIDE BRUSHES
![valve guide tab](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/valve-guide-tab.png)
![VALVE GUIDE BRUSHES](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/VALVE-GUIDE-BRUSHES.jpg)
EXTRA-LONG BRUSHES
For cleaning oil passages and channels in general
![](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/EXTRA-LONG-BRUSHES-2.png)
KIT 1E: 1, 1a, 2, 2°………………………………………….3pz per tipo 3…………………………………………………….6pz 4, 5, 6, 7, 8, 9, 38, 41, 42, 46, 10a(5”-127mm)..1pz per tipo Totale: 29 spazzole |
KIT VGNK: 1, 2, 3, 44N, 47N, 48N, 49N……..…….1pz per tipo KIT VGCK: 11C, 13C, 14C, 44C, 47C, 48C, 49C….1pz per tipo |
OIL LINE KIT: 1…………………….1pz 2…………………….2pz 3…………………….6pz |
OIL GALLERY KIT: 5, 7, 8, 38, 42…….1pz per tipo |
NYLON ROD BRUSHES
Nylon 6-12, available in diameters up to 14” (355mm)
Cylinder cleaning after processing with Flex-Hone
![NYLON ROD BRUSHES1](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/NYLON-ROD-BRUSHES1-.png)
![NYLON ROD BRUSHES](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/NYLON-ROD-BRUSHES.jpg)
BRUSH WITH HANDLE
Code: SPOKE
Diameter 3″ – 76mm
![BRUSH WITH HANDLE](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/BRUSH-WITH-HANDLE.jpg)
O-R SEATS IN MONOBLOCK CLEANING
Code: 10-SJD
Diameter 5-1/2″-140mm – Extra-hard Nylon bristles .079*-2mm diameter
Sinniee with ssinoss See 0-R removal 9ne sear seranina top
(John Deere) Different measurements available upon request.
![O-R SEATS IN MONOBLOCK CLEANING](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/O-R-SEATS-IN-MONOBLOCK-CLEANING.jpg)
DESCALING
Hardened cobalt steel balls, welded at the ends of stainless steel aircraft cables.
DEB-3
3 Cables, heavy-duty use.
Use at low rpm. Excellent for removing heavy carbon deposits, etc.
For diameters up to 1-1/2” – 38mm.
DEB-4
5 Cables, light use.
Use at 2.000 rpm for the removal of rust and scale deposits from pipes.
For diameters up to 5” – 127mm. Can also work in curved pipes.
DEB-3x
Same as DEB-3, but with longer cables for tubes of diameter up to 4” – 101mm.
Use at 2.000 rpm for rust removal
DEB-4x
Same as DEB-4, but with longer cables for tubes of diameter up to 7” – 177mm
![DESCALING_EN](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/DESCALING_EN.jpg)
![DESCALING](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/02/DESCALING.jpg)