Removal Tools
MANUAL INSTALLATION TOOL WITH PREWINDER
They have always been the safest and most reliable system for installing threaded inserts, especially in smaller sizes (M2.5-M3). They have a prewinder nose that reduces the thread diameter and aligns it perfectly. The same tool can install both Free Running and Locking inserts. Recommended for low installation volumes.
![](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/01/ATTREZZO-DI-POSA-MANUALE-CON-PREAVVOLGITORE-1.png)
ROD INSTALLATION TOOL
They have both hexagonal and cylindrical attachments for use with power tools and a convenient screwdriver-like handle for manual use. Great speed in operations with medium to high production batches. For metric pitches, there are separate tools for Free-Running and Locking inserts. The rods have a very long lifespan; it is sufficient to replace the hook when worn. For mounting the aluminum handle, the hexagon must be removed by extracting the side retaining pin. The model for 0-80 is for manual use only.
![](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/01/attrezzo-di-posa-ad-asta-2.jpg)
REMOVAL TOOL
The extraction tool has a configuration identical to the installation rod. The difference lies in the extraction tang, which allows the removal of the insert with a screwing operation, avoiding damage to the component, the threading, and the insert. It can also be used to correct the insertion depth of the insert during adjustment phases.
![](https://www.tecnimetal-tm.eu/wp-content/uploads/2024/01/attrezzo-di-posa-ad-asta-2-copia.jpg)